Brief descriptions of Jones bikes that have gone to customers
Bob’s bike
Bob just built up and rode his bike and sent us a picture and a few words:
“Took my time putting the bike together this week. So far only 1000% satisfied, but I’m sure that will go up! The truss was a little daunting, but went together very easy. Right now I have 10mm stack […]
Jones as a City and Touring Bike
This bike was ridden and reviewed by Patrick O’Grady for Adventure Cyclist magazine.
I designed/developed/evolved the geometry of this bike out on the tight single track trails in the woods and the dirt and gravel mountain roads near my shop here in Oregon. It is a “mountain bike” but is also an All Terrain Bike […]
Black Steel and XTR
This is a black steel Spaceframe bike with XTR, BB7s and a big Bud front tire. It is going to Brandon in New York.
Another Bike
Joe got a Jones singlespeed bike a few months ago. His wife liked it so much and kept taking it for rides, now she is getting one too.
Now I’ll clean, tune and pack the bike. It’ll ship on Monday.
Mike’s bike
Mike should have his bike very soon.
This is not his first Jones bike.
New Wheel Build
I built this wheel yesterday for a bike I’m building today.
The rear hub is an Industry Nine with a SRAM XX1 compatible freehub body.
The rim is the Surly Rabbit Hole and it has two rows of 32 holes for the spokes. I built this wheel with all the spokes into the holes on the […]
Aluminum Silver Loop H-Bar
Here is the new aluminum Loop H-Bar in silver on a singlespeed bike I’m building now.
Eccentric Bottom Bracket (EBB)
The bottom bracket shell for the eccentric on all Jones frames has the center section machined away. This saves weight but the main reason for this is to support the EBB at the widest points. Since the EBB is supported at the widest points and not at the center, it will not rock from […]
Target / Practice
I had a good ride Sunday. I took out the new bike I built, the pre-production steel Diamond with unicrown frameset, that was at Interbike. A few specification details; all the spokes, front, rear, left and right are the same length and are equally tensioned. The hubs have different dimensions but the spoke length […]