The light mounts are in.

I made the first few myself then sent one to Mark at Paragon Machine Works. We talked about the design and he did the rest.

The one bolt, two piece design is simple, light and clamps firmly to the fork.

The tilt is adjustable by hand if the bolt isn’t too tight.

It’s designed to be used with Light & Motion lights and is available alone or with a Light & Motion lighting system.

 The lower position throws a longer patch of light on the ground, lighting further down the trail and close to the tire. The lower light angle also increases shadows making it easier to see uneven terrain.

Available in black, silver or polished.